Showing 17–32 of 168 resultsSorted by latest
Reinforced Masonry Engineering Handbook, 9th Edition, is based on the requirements of the 2021 International Building Code® and The Masonry Society (TMS 402/602-16) Building Code Requirements and Specification for Masonry Structures. This book is useful to designers of reinforced masonry in eliminating repetitious and routine calculations. This handbook will increase the understanding and reduce the time required for masonry design.
During this five-part recorded webinar series, masonry experts and Committee leaders review the new standards TMS 402-22 Building Code Requirements for Masonry Structures and TMS 602 Specification for Masonry Structures and changes made since the 2016 edition. These standards will form the basis for masonry design provisions in the 2024 International Building Code and other model building codes and include some major new provisions that include a new appendix on masonry partition walls reinforced with Glass Fiber Reinforced Polymer (GFRP) reinforcement, completely revised anchored and adhered veneer provisions, and enhancements throughout the standards.
Topics covered in this series include:
Save 10% when purchasing all 5 webinars
TMS 402/602-22 Building Code Requirements and Specification for Masonry Structures contains two standards and their commentaries: Building Code Requirements for Masonry Structures (TMS 402-22) and Specification for Masonry Structures (TMS 602-22). The Code (TMS 402) covers the design and construction of masonry structures while the Specification (TMS 602) is concerned with minimum construction requirements for masonry in structures.
The new 2022 edition has been updated throughout for new referenced standards, including ASCE/SEI 7-22 and numerous ASTM Standards. Other major changes to the TMS 402/602-22 include:
Member and bulk discounts available — Learn about membership
Available online with improved features (copy, print, highlight, annotate, and more) plus more multi-user flexibility through Masonry Standards Online.
TMS Members – 50% off all subscriptions + multi-user discounts
Non-Members – 40% off an annual subscription by adding it to your cart along with a hard copy or download
TMS 402/602-22 Building Code Requirements and Specification for Masonry Structures contains two standards and their commentaries: Building Code Requirements for Masonry Structures (TMS 402-22) and Specification for Masonry Structures (TMS 602-22). The Code (TMS 402) covers the design and construction of masonry structures while the Specification (TMS 602) is concerned with minimum construction requirements for masonry in structures.
The new 2022 edition has been updated throughout for new referenced standards, including ASCE/SEI 7-22 and numerous ASTM Standards. Other major changes to the TMS 402/602-22 include:
*This file includes errata through September 22, 2022.
Available online with improved features (copy, print, highlight, annotate, and more) plus more multi-user flexibility through Masonry Standards Online.
TMS Members – 50% off all subscriptions + multi-user discounts
Non-Members – 40% off an annual subscription by adding it to your cart along with a hard copy or download
These masonry course notes were developed for use in semester‐long, undergraduate or combined undergraduate/graduate courses in masonry design. The notes serve as a textbook for structural design classes or could be used to supplement critical topics in construction management courses.
This edition of the Masonry Course Notes is based on the 2016 edition of TMS 402/602.
This student version contains one item to replace a textbook:
The instructor version includes all items listed below:
Instructors: Email tmsaccountant@masonrysociety.org to request access to these additional resources.
Assessment and Retrofit of Masonry Structures provides background, reference material, and guidance to design professionals, building owners, and contractors confronted with addressing existing masonry construction. Information related to construction characteristics, typical material properties, and analytical approaches are included for historic, transitional, and modern masonry construction typologies. The main focus of the book is structural stabilization, strengthening, and retrofit with maintenance and serviceability items (such as water penetration and cleaning) addressed as subtopics.
Thank you for your interest in becoming a financial sponsor of the 14th North American Masonry Conference! Sponsorship is very important to ensure the success of the conference and to provide an enjoyable and comfortable forum for the attendees.
See the table below for sponsorship level ranges or this page for a full list of benefits. The available event & item sponsorships are listed here.
Contact TMS at (303) 939-9700 or email 14namc@masonrysociety.org if you have questions.
The Reinforced Concrete Masonry Construction Inspector’s Handbook, 11th Edition, covers all aspects of reinforced concrete masonry construction and inspection. The materials are based on Code requirements and practical experience. The 11th edition incorporates the requirements of the 2021 International Building Code; the 2016 Building Code Requirements for Masonry Structures (TMS 402-16) and Specification for Masonry Structures (TMS 602-16).
This nationally recognized publication is the primary source of information for understanding the material required for the Structural Masonry Inspection Certification Exam administered by ICC. Every inspector, designer, and contractor should have a copy of this important publication.
This code prescribes minimum design and construction requirements for mitigating thermal bridges in the building envelopes of new buildings and additions to existing buildings. It applies to buildings having concrete or masonry walls; masonry veneer, including veneer attached to frame walls; and balconies or components that extend through the building envelope. It also has criteria for metal thermal bridges in these buildings.
This code is applicable to commercial and mid- to high-rise residential buildings that use either electricity or fossil fuel (regardless of the generation source). It can be used with applicable energy codes and standards.
This guide covers the design and construction of dry-stack concrete masonry structures constructed from hollow units. Among the subjects covered are history and background, fire resistance, design, construction, quality assurance, materials, surface-bonding, placement of embedded items, analysis, strength and serviceability, flexural and axial loads, shear, details and development of reinforcement, walls, and seismic design requirements.
Dry-stack masonry construction, which consists of individual masonry units placed without the use of mortar in the head and bed joints, is one of the earliest forms of construction. Despite its historical use, there is little in the way of contemporary design and construction guidance in the United States on the use of dry-stack masonry systems for structural applications. Because the majority of dry-stack research has been limited to reinforced or prestressed concrete masonry construction, the scope of this guide is limited to reinforced or prestressed, dry-stack construction of concrete masonry units.
Design and Construction Guidelines for Dry-Stack Concrete Masonry was developed as a non-mandatory aid for designers, building officials, contractors, educators, and others interested in dry-stack masonry construction.
Dry-stack masonry construction, which consists of individual masonry units placed without the use of mortar in the head and bed joints, is one of the earliest forms of construction. Despite its historical use, there is little in the way of contemporary design and construction guidance in the United States on the use of dry-stack masonry systems for structural applications. Because the majority of dry-stack research has been limited to reinforced or prestressed concrete masonry construction, the scope of this guide is limited to reinforced or prestressed, dry-stack construction of concrete masonry units.
TMS Responds is a resources developed to help answer common, and sometimes, not so common questions on masonry materials, design, construction, evaluation, and repair.
Vol. 19, No. 1 (June 2021), responds to questions on:
Topics addressed include an introduction to strength design concepts, background on structural masonry, general design, requirements for reinforcement and anchor bolts, and recommendations for construction. Also discussed are strength design procedures for beams, walls, columns, and shear walls. While the guide addresses unreinforced masonry, the primary focus is reinforced masonry designed to the TMS 402/602-16 and the 2018 International Building Code. The book contains dozens of design examples and design tips, coupled with excellent discussion.
The authors — Dr. Richard Bennett, a Professor at the University of Tennessee, and Mr. John Hochwalt, Director of Engineering at KPFF Engineers — both actively serve on the committee responsible for TMS 402/602, which contains requirements for strength design of masonry.
Topics addressed include an introduction to strength design concepts, background on structural masonry, general design, requirements for reinforcement and anchor bolts, and recommendations for construction. Also discussed are strength design procedures for beams, walls, columns, and shear walls. While the guide addresses unreinforced masonry, the primary focus is reinforced masonry designed to the TMS 402/602-16 and the 2018 International Building Code. The book contains dozens of design examples and design tips, coupled with excellent discussion.
The authors — Dr. Richard Bennett, a Professor at the University of Tennessee, and Mr. John Hochwalt, Director of Engineering at KPFF Engineers — both actively serve on the committee responsible for TMS 402/602, which contains requirements for strength design of masonry.
No products in the cart.