TMS 402/602-22 Online – Annual Subscription
$200.00 for 1 year
TMS eStore
Featured Products
All Products
Showing 1–16 of 168 resultsSorted by latest
-
ACI-TMS CODE-122.3-24: Thermal Properties of Concrete and Masonry for Use in Determining Energy Code Compliance Except for Low-Rise Residential Buildings — Download Version
$99.00This Code prescribes minimum design and construction requirements for energy efficiency of building envelopes of new buildings and additions to buildings. It applies to buildings having concrete walls, roofs, or floors; masonry walls; and masonry veneer, including veneer attached to frame walls as part of the building envelope. It also provides minimum thermal properties for these assemblies for code compliance.
This Code is applicable to commercial and mid- to high-rise residential buildings that use either electricity from any generation source or fossil fuel. It can be used with applicable energy codes and standards such as ASHRAE 90.1 and the International Energy Conservation Code (IECC).
This protected download cannot be printed.
-
TMS eJournal, Vol. 42, No. 1
$75.00 (PDF)The Masonry Society Journal is an open forum for the presentation and discussion of masonry research and as such, welcomes papers related to the field. The following papers are included in Volume 42.
See below for authors, abstracts, and links to purchase individual papers
Technical Papers
- All Crcked Up Over Icr
- Laboratory Testing of Historic Mortars: Part 1 – A Close Look to a 200-year-old Historic Clay-Lime Mortar
- Laboratory Testing of Historic Mortars: Part 2 – Microstructure of a Historic Feebly-Hydraulic Lime Mortar Containing Silica Flour
Canada/US (CANUS) Collaborative Project Papers
- Comparison of Reinforced Masonry Design: Project Overview and Design Examples
- Comparison of Masonry Beam Design and Detailing Provisions
- Comparison of Out-of-Plane Reinforced Masonry Wall Design Provisions
- Comparison of Reinforced Masonry Shear Wall and Seismic Design Provisions
A Harmonization of Canadian and American Masonry Structures Design Standards
Funding for this project was provided jointly by the National Concrete Masonry Association Education and Research Foundation, the Canada Masonry Design Centre, the Canadian Concrete Masonry Producers Association, and the Canadian Standards Association.
-
Standards for Architectural Cast Stone, 2023 Edition Online – Annual Subscription
$90.00 for 1 yearStandards for Architectural Cast Stone contains three standards and their commentaries:
- Standard for Design of Architectural Cast Stone (TMS 404)
- Standard for Fabrication of Architectural Cast Stone (TMS 504)
- Standard Specification for Installation of Architectural Cast Stone (TMS 604)
Key updates and revisions incorporated by the Committee include:
- Updates for coordination with other reference standards including updates to reflect changes in ASTM standards and reference to the 2022 edition of ASCE/SEI 7.
- General cleanup and clarification of provisions and expanded commentary.
- Introduced new deflection limits of l/600 for cast stone subjected to out-of-plane loads.
- Removed the historical drying shrinkage limit of 0.000325, replaced by a requirement that drying shrinkage be tested and reported.
- Minimum thickness requirement of 2.5 inches (64 mm) for all cast stone units.
- Permitting the use of glass fiber reinforced polymer bars meeting ASTM D7957/C7957M.
- Minimum qualifications for testing labs and inspection agencies are required to be defined
Subscription does not auto-renew
Select the number of users/seats:
-
TMS 302-18 Standard Method for Determining Sound Transmission Ratings for Masonry Assemblies Online – Annual Subscription
$0.00 for 1 yearThe TMS 302 Sound Standard provides minimum requirements for rating masonry walls for sound transmission class (STC) and outdoor-indoor transmission class (OITC) based on testing calibrated calculation procedures.
Topics covered include reference standards, definitions and notations, materials, construction, and methods to STC and OITC rating for concrete masonry and clay masonry assemblies.
TMS 302-18 is adopted by reference in the 2021 International Building Code.
Available through Masonry Standards Online thanks to the support ofÂ
Select the number of users/seats:
-
ACI-TMS CODE 122.2-24 Thermal Properties of Concrete and Masonry for Use in Determining Energy Code Compliance for Low-Rise Residential Buildings — Download Version
$99.00This Code prescribes minimum design and construction requirements for energy efficiency of building envelopes of new buildings and additions to buildings. It applies to buildings having concrete walls, roofs, or floors; masonry walls; and masonry veneer, including veneer attached to frame walls as part of the building envelope. It also provides minimum thermal properties for these assemblies for code compliance. This Code is applicable to low-rise residential buildings that use either electricity from any generation source or fossil fuel. It can be used with applicable energy codes and standards such as the International Energy Conservation Code (IECC).
This protected download cannot be printed.
-
TMS 402/602-22 Online – Annual Subscription
$200.00 for 1 yearThe Masonry Standards Online version of TMS 402/602 has additional features not available with the download version, including:
- Copy – Copy text, equations, tables, and figures
- Print – Print sections from the standard and commentary
- Internal linking – Quickly jump to a referenced sections, figures, tables, or equations
- Share – Share links to specific sections within the standard or commentary
- Highlight and annotate – Highlight, annotate, and add notes to refer to later
- Notation and definition tooltips – Hover over terms and notation to display helpful tooltips with definitions
- Multi-user options – See below for more information
- and more!
View a quick tutorial for navigating MSO below.
Preview Chapter 1 of TMS 402-22
TMS Members
50% off all subscriptions + multi-user discounts
Non-Members
40% off an annual subscription by adding it to your cart along with either a hard copy or digital copy
Subscription does not auto-renew
Available Formats
TMS 402/602-22 Only
Bundle a TMS 402/602 hard copy with the download version to receive a 40% discount on the download (the discount will be applied after adding both items to your cart).
Select the number of users/seats:
-
TMS eJournal, Vol. 41, No. 1
$75.00Technical Papers
- Artificial Neural Network to Predict the Shear Strength of Partially Grouted Masonry Walls
By: Jeffrey Hung, Bennett Banting, Cristián Sandoval, and Carlos Cruz-Noguez - Flexural Bond Strength of Masonry Assemblies with Lightweight Grout
By: Cooper Banks, Laura Redmond, Ben Hiner, Stephen Wright, and Michael Stoner - High-Strength Reinforcing Bars (HSRBs) and TMS 402
By: Omar Khalid and Dimitrios Kalliontzis
Award Winning NAMC Papers
- Seismic Out-of-Plane Retrofit of URM Walls Using Timber Strong-Backs
By: Ivan Giongo, Dmytro Dizhur, Jason Ingham, Robert Hudson, Marta Giaretton - An Analysis Model for Partially Grouted Shear Walls Using Macro-Modelling: Importance of Reporting Joint Shear Strength
By: Amr Ba Rahima, Clayton Pettit, Carlos Cruz Noguez, Jeffrey Hung - Shake Table Tests of Traditional Timber Frame Masonry Construction System
By: Aanisa Gania, Durgesh C Rai, Jan Mohammad Banday - Sensitivity Analysis of Parameters on the In Plane Behavior of Unreinforced Masonry Wall Strengthened with Steel Wire Reinforced Cementitious Matrix (SWRCM)
By: Dattatreya Tripathy and Vaibhav Singhal - Preserving a Landmark: Saving a Historic Masonry Landmark with Cost Saving Restoration Construction Practices
By: Nathan Harres and Ariel Kousgaard
- Artificial Neural Network to Predict the Shear Strength of Partially Grouted Masonry Walls
-
Masonry Designers’ Guide – 2022
$220.00The Masonry Designers’ Guide – 2022 (MDG-2022) is a valuable reference for engineers, contractors, architects, inspectors, building code authorities, and educators. Initial chapters address materials, testing, quality assurance, quality control, and construction methods with reference to specific provisions of the 2022 TMS 402 Code and TMS 602 Specification. Subsequent chapters illustrate fundamental design concepts and demonstrate how to apply Code provisions to structural design of common masonry members. The MDG-2022 also includes discussion on masonry provisions in the 2024 International Building Code (IBC) and its examples are based on ASCE /SEI 7-22.
More than 150 design examples included discuss concrete and clay masonry, autoclaved aerated concrete (AAC) masonry, prestressed masonry, glass unit masonry and more. The final three chapters of the book include 60+ comprehensive design examples for three common masonry buildings (Chapters 19-21).
Brand new examples added to this edition deal with GFRP reinforced masonry, veneer, anchor bolts, and more. Read more about the examples and view sample pages at the bottom of this page.
Member and bulk discounts available! –Â Learn about membership
Available Formats
MDG-2022 OnlyOrdering either MDG-2022 hard copy option provides free digital access to the MDG-2022 when purchased in the same order (the discount will be applied after adding both items to your cart).
If you previously purchased a hard copy, you can also redeem access here.
-
Masonry Designers’ Guide – 2022 Download Version
$220.00The Masonry Designers’ Guide – 2022 (MDG-2022) is a valuable reference for engineers, contractors, architects, inspectors, building code authorities, and educators. Initial chapters address materials, testing, quality assurance, quality control, and construction methods with reference to specific provisions of the 2022 TMS 402 Code and TMS 602 Specification. Subsequent chapters illustrate fundamental design concepts and demonstrate how to apply Code provisions to structural design of common masonry members. The MDG-2022 also includes discussion on masonry provisions in the 2024 International Building Code (IBC) and its examples are based on ASCE /SEI 7-22.
More than 150 design examples included discuss concrete and clay masonry, autoclaved aerated concrete (AAC) masonry, prestressed masonry, glass unit masonry and more. The final three chapters of the book include 60+ comprehensive design examples for three common masonry buildings (Chapters 19-21).
Brand new examples added to this edition deal with GFRP reinforced masonry, veneer, anchor bolts, and more. Read more about the examples and view sample pages at the bottom of this page.
Available Formats
MDG-2022 Only
Ordering either MDG-2022 hard copy option provides free digital access to the MDG-2022 when purchased in the same order (the discount will be applied after adding both items to your cart).
If you previously purchased a hard copy, you can also redeem access here.
-
TMS 402/602-16 Online – Annual Subscription
$150.00 for 1 yearThe Masonry Standards Online version of TMS 402/602 has additional features not available with the download version, including:
- Copy – Copy text, equations, tables, and figures
- Print – Print sections from the standard and commentary
- Internal linking – Quickly jump to a referenced sections, figures, tables, or equations
- Share – Share links to specific sections within the standard or commentary
- Highlight and annotate – Highlight, annotate, and add notes to refer to later
- Notation and definition tooltips – Hover over terms and notation to display helpful tooltips with definitions
- Multi-user options – See below for more information
- and more!
View a quick tutorial for navigating MSO below.
TMS Members
50% off all subscriptions + multi-user discounts
Non-Members
40% off an annual subscription by adding it to your cart along with either a hard copy or digital copy
Subscription does not auto-renew
Other Formats
TMS 402/602-16 Only
Select the number of users/seats:
-
Standards for Architectural Cast Stone, 2023 Edition
$90.00Standards for Architectural Cast Stone contains three standards and their commentaries:
- Standard for Design of Architectural Cast Stone (TMS 404)
- Standard for Fabrication of Architectural Cast Stone (TMS 504)
- Standard Specification for Installation of Architectural Cast Stone (TMS 604)
Member and bulk discounts discounts are available for this product.
Click here to learn about membership.Key updates and revisions incorporated by the Committee include:
- Updates for coordination with other reference standards including updates to reflect changes in ASTM standards and reference to the 2022 edition of ASCE/SEI 7.
- General cleanup and clarification of provisions and expanded commentary.
- Introduced new deflection limits of l/600 for cast stone subjected to out-of-plane loads.
- Removed the historical drying shrinkage limit of 0.000325, replaced by a requirement that drying shrinkage be tested and reported.
- Minimum thickness requirement of 2.5 inches (64 mm) for all cast stone units.
- Permitting the use of glass fiber reinforced polymer bars meeting ASTM D7957/C7957M.
- Minimum qualifications for testing labs and inspection agencies are required to be defined.
Other Formats:
-
Standards for Architectural Cast Stone, 2023 Edition (Download Version)
$90.00Standards for Architectural Cast Stone contains three standards and their commentaries:
- Standard for Design of Architectural Cast Stone (TMS 404)
- Standard for Fabrication of Architectural Cast Stone (TMS 504)
- Standard Specification for Installation of Architectural Cast Stone (TMS 604)
Member and bulk discounts discounts are available for this product.
Click here to learn about membership.Key updates and revisions incorporated by the Committee include:
- Updates for coordination with other reference standards including updates to reflect changes in ASTM standards and reference to the 2022 edition of ASCE/SEI 7.
- General cleanup and clarification of provisions and expanded commentary.
- Introduced new deflection limits of l/600 for cast stone subjected to out-of-plane loads.
- Removed the historical drying shrinkage limit of 0.000325, replaced by a requirement that drying shrinkage be tested and reported.
- Minimum thickness requirement of 2.5 inches (64 mm) for all cast stone units.
- Permitting the use of glass fiber reinforced polymer bars meeting ASTM D7957/C7957M.
- Minimum qualifications for testing labs and inspection agencies are required to be defined.
Other Formats:Â Â Printed Copy
This product provides a single-user license for this document. Please review the restrictions below. Click here to see alternative formats and multi-user options.
-
14th North American Masonry Conference Proceedings on USB
$84.00The 14th North American Masonry Conference (NAMC) was held June 11–14, 2023 in Omaha, Nebraska. The Conference was jointly hosted by Durham School of Architectural Engineering and Construction at the University of Nebraska-Lincoln (UNL) and the Nebraska Masonry Alliance (NMA), and sponsored by the Masonry Society (TMS). The 14NAMC is one in a series of quadrennial conferences sponsored by The Masonry Society. This USB drive contains the 100 papers that were presented at the Conference.
-
TMS Responds, Vol. 21, No. 1
$10.00TMS Responds is a resources developed to help answer common, and sometimes, not so common questions on masonry materials, design, construction, evaluation, and repair.
Vol. 21, No. 1 (February 2023), responds to questions on:
- Corrosion of Embedded Metal Ties
-
TMS eJournal, Vol. 40, No. 1
$75.00Technical Papers
- Investigation of Mix Designs for Lightweight Grout per ASTM C476
By: Rumi Shrestha, Laura Redmond, Jason Thompson, and Prasad Rangaraju - Quantitative Appraisal of the Sustainability of Compressed Stabilized Earthen Masonry
By: Elena Hoff and Ece Erdogmus
General Interest Papers
- Compression Behavior of Corrugated Veneer Ties On Insulation
By: Richard M. Bennett, Charles B. Clark, Jr., and Jim Bryja - Tension and Compression Controlled Sections in the 2022 TMS 402 Code
By: Richard M. Bennett and John M. Hochwalt
- Investigation of Mix Designs for Lightweight Grout per ASTM C476
-
TMS Responds, Vol. 20, No. 1
$10.00TMS Responds is a resources developed to help answer common, and sometimes, not so common questions on masonry materials, design, construction, evaluation, and repair.
Vol. 20, No. 1 (September 2022), responds to questions on:
- Major revisions from the 2016 to 2022 edition of TMS 402/602