Special Inspection Webinar – Testing

$75.00

This webinar will review common masonry tests and sampling methods as well as when such test may be appropriate and required by the Quality Assurance/Quality Control programs. Common errors in testing will be discussed to try to reduce such errors from being replicated in the future. Destructive and non-destructive tests and evaluation methods will briefly be reviewed for situations where construction testing was not performed, was not performed properly, or when results are suspect.


Learning Objectives:

  • Understand the purpose of Quality Assurance and Quality Control programs
  • Recognize and implement an effective Quality Control program
  • Learn how to properly sample and test materials
  • Know what to do when test results do not verify material or construction requirements
This product has a member discount. Become a member.

Description

The Masonry Society (TMS) is pleased to offer a series of 9 webinars on special inspection of structural masonry, helpful for anyone who is or plans to become a Structural Masonry Special Inspector, or who is otherwise involved with special inspection and testing of masonry.

Through this series of webinars, speakers will address special inspection duties, masonry materials, construction, and protection items to be observed and verified by special inspections. A number of other topics of interest including testing, introduction to code requirements, and more will also be reviewed. The webinars are excellent preparatory instruction for those planning to the take the ICC Structural Masonry Special Inspection Examination.


A comprehensive set of handout materials based on the presentations will be made available to attendees. Attendees are encouraged to have access to the IBC, TMS 402/602, the Reinforced Concrete Masonry Construction Inspector’s Handbook, and ASTM Standards to maximize their learning, especially if they plan to take the ICC Structural Masonry Special Inspection examination.

The presentations are targeted toward inspectors and field testing technicians, although mason contractors, materials suppliers, building code officials, engineers, architects, and laboratory personnel will also find the webinars informative.

Attendees will learn about structural masonry code inspection requirements, proper placement of materials, mortar and grout composition, how to determine the compressive strength of masonry, and appropriate severe weather procedures. This comprehensive series is aimed at helping inspectors, testing technicians, engineers, and building officials identify and verify key quality assurance items on the job site.


#TopicPresenterDate
1Introduction to Special Inspection, the 2018 IBC, and TMS 402/602Phillip Samblanet, The Masonry SocietySeptember 5, 2019
2Introduction to Masonry Units (with the prime focus being concrete masonry and clay units)John Chrysler, Masonry Institute of AmericaSeptember 12, 2019
3Reinforcement and ConnectorsPhillip Samblanet, The Masonry SocietySeptember 19, 2019
4Mortar and Mortar MixingJamie Farny, Portland Cement AssociationSeptember 26, 2019
5GroutJamie Farny, Portland Cement AssociationOctober 3, 2019
6Basic Masonry Construction including tolerances and movement jointsJohn Chrysler, Masonry Institute of AmericaOctober 10, 2019
7Reinforcing and GroutingPhillip Samblanet, The Masonry SocietyOctober 17, 2019
8Hot and Cold Weather ConstructionJamie Farny, Portland Cement AssociationOctober 24, 2019
9TestingJohn Chrysler, Masonry Institute of AmericaOctober 31, 2019