Join us on Thursday, March 8th (1:00 pm – 2:00 pm EST) as Richard Bennett and Luke Scoggins discuss major changes to the anchor bolt design provisions in the 2016 edition of TMS 402.
There were two major changes to the anchor bolt design provisions in the 2016 edition of TMS 402. One change was to increase the calculated shear crushing strength by 67%. The other change was to go from a linear interaction equation for combined bending and shear to an elliptical interaction equation. This webinar will cover the basis for these changes. In addition to the changes in TMS 402, ASCE 7-16 reduced the required load increase for seismic applications when the anchor bolt failure is not yielding from 2.5 to 2.0. The webinar will also cover general anchor bolt design in masonry, will provide practical design tips, and show examples of anchor bolt design.
Upon completing this program, the participant should:
- Understand the changes, and the basis for the changes, to anchor bolt design provisions in TMS 402.
- Understand the design of anchors bolts in tension.
- Understand the design of anchor bolts in shear.
- Understand the design of anchor bolts in combined tension and shear.
View a full list of the remaining webinars in this webinar series. Each webinar will provide 1 hour of AIA Learning Units and some qualify as HSW LUs. All webinars start at 1 pm ET.